Liteline LEDTPK-1M-WW - 1-Meter 12V Flexible Indoor / Outdoor LED Tape Kit with Plug-In Driver - Warmwhite / 3500K - IP65 - 2.3W - 205 Lumens

Liteline LEDTPK-1M-WW Spec Sheet

Installation Instructions 

LEDTPK-1M-WW
One Meter (39-3/8") Flexible LED Tape Light Kit --- Cabinet, Cove & Display

LED Tape
A 2.3W LED tape, providing high brightness light output while maintaining cool to the touch LEDs. A linear beam spread of 140° maintains an even light distribution. The LED tape is rated IP65 which makes it ideal for indoor or outdoor use. The LEDs are rated for 30,000 hours.

Cuttable
LED tape light is cuttable (cutting marks available at 10cm intervals). Silicone (not included) shall be added to the end after cutting.

Light Output
A warm white (3500K) colour temperature with 205 lumens output.

Mounting
Adhesive backing on the tape that adheres to almost any flat surface.

Plug-in Driver
A 6 watt low profile class 2 LED driver, a 6' (1829mm) power cord and a rotary on/off switch. The plug-in driver provides 12V DC output and a 0.5A max. The driver can accommodate universal input voltage (100-240V, 50/60Hz). Driver must be located indoors.

Kit Includes
• One meter (39-3/8") LED tape.
• 42-1/2" (1080mm) Power feed.
• 6W plug-in driver with 6' (1829mm) cord and a rotary switch.
• Mounting hardware.

Operating Temperature
-20°C ~ 40°C (-4°F ~ 104°F)

For any questions about Liteline LEDTPK-1M-WW - 1-Meter 12V Flexible Indoor / Outdoor LED Tape Kit with Plug-In Driver - Warmwhite / 3500K - IP65 - 2.3W - 205 Lumens please use the form below.